Hydrabrite®
Cold Drawn, Bright Annealed Low Carbon Hydraulic Tubing |
Hydrabrite® hydraulic fluid line tubing is produced in 1010 carbon by the Eupora, Mississippi mill of the Carbon & Alloy Tube Group of Plymouth Tube Co. to the SAE specification J525. The current
Hydrabrite® size range is .250” OD thru 1.375” OD by .028” wall thru .120” wall.
Plymouth Tube Co.’s Eupora Mill has completed the ISO/TS
16949:2002 surveillance audits 3 and 4. The audits consisted of
two auditors for 1.5 days of auditing on all shifts. The Eupora
Mill was established in 1985 built to supply the Hydraulic tube
market and presently also serves the DOM tube market.
|
|
Plymouth's Hydrabrite® tubing
strength, ductility and formability make it a clear
choice for critical parts such as fluid power seals and
fittings. |
|
 |
►
Mechanical Properties
|
Mechanical Properties |
Values |
|
Yield Strength, min |
24,650 psi |
|
Ultimate Strength, min |
44,950 psi |
|
Elongation in 50 mm, min |
35%(1) |
|
Hardness (Rockwell B), max |
65(2) |
|
1) For tubing having nominal outside diameter of 0.368” or less, and/or wall thickness of
.035” or less, a minimum elongation of 25% is permissible.
(2) The hardness test shall not be required on tubing with nominal wall thickness of less than
0.065”. Such tubing shall meet all other mechanical properties and performance
requirements. |
|
Have a question
about Hydrabrite fluid line tubing?
Click here to ask!
Our Team of experts is ready to help you solve
your issue! |
|
|
|
|