Email Icon RSS Feed Icon LinkedIn Icon Facebook Icon Twitter Icon
Hydraulic Header Image.png

HS-50: High Pressure Hydraulic Tubing™

The Plymouth Advantage

From replacing machined bar in fittings to allowing for higher pressures in
assemblies, engineers are using HS-50™ in a variety of hydraulic
applications. With similar mechanical properties as J2614, HS-50™ is
a cost effective alternative that provides:

the STRENGTH of higher alloy steel

the FORMABILITY of J525

the CONSISTENCY that Plymouth's products are known for.

Contact us today to learn more about HS-50™! HS50@plymouth.com or 630-393-3550

 Benefits

With a minimum yield strength of 50,000 psi (345 MPa) and 30% minimum elongation, HS-50™ allows the system designer to;

  1. Design for higher system pressures
  2. Reduce overall system weight
  3. Reduce fluid turbunlence and flow velocity
  4. Improve fluid flow volume
  5. Reduce system heat generation
  6.  HS-50 data sheet

 HS-50 Infographic

 Looking for 2614?

 HS-50 High Pressure Hydraulic Tubing™ is a High Strength Low Alloy (HSLA) DOM tubing developed to meet the mechanical and chemical composition requirements of SAE J2614 specification and has been shown to provide better consistency than J2614 when bending and forming.

 

Mechanical Requirements:

Mechanical Requirements

Yield Strength

Tensile Strength

Elongation

Applicable Specification

MPa min

psi Min

MPa min

psi min

% min

HS-50 High Pressure Hydraulic

345

50,025

500

72,500

30

SAE J2614


Chemical Composition:  

Chemical Composition

C%

MAX

Mn% MAX

S%

MAX

P%

MAX

Si%

MAX

AI% MAX

Micro Alloying Elements

(Nb, Cb, Ti, V) MAX

HS-50 High Pressure Hydraulic

0.18

1.5

0.035

0.035

0.35

Max

0.15

 

 

    • Design for higher system pressures
    • Reduce overall system weight
    • Reduce fluid turbulence and flow velocity
    • Improve fluid flow volume
    • Reduce system heat generation

Ask a question below: