Aim in the Right Direction: SPECIFY PLYMOUTH
STEEL TUBING, SHAPED TUBING, NEAR-NET SHAPED EXTRUSIONS & NET-SHAPED COLD DRAWN PROFILES
The Cold Drawn Manufacturing Process
Plymouth Tube strives to achieve tolerances and standards exceeding industry standard. As an extended arm of your Engineering department, Plymouth learns as much as possible about your specific firearms application and offers solutions based on your needs. Our proprietary process provides a profile which is “machine ready,” saving valuable production time and eliminating waste. Profiles are available symmetrical and non-symmetrical which means Plymouth’s precision geometric profile combinations and shapes are nearly unlimited!
MATERIALS:
- Stainless Steel
- Carbon and Alloy Steel
- Nickel-based Alloys
- Titanium
- Exotic Alloys
ECONOMIC ADVANTAGES:
- Reduce Machining Time
- Reduce Number of Operations
- Increase Productivity
- Reduce Scrap and Material Waste
- Minimize Cutting Tools
- Reduce Carbon Footprint
QUALITY BENEFITS:
- Tight Tolerance Control
- Controlled Mechanical Properties
- Improved Surface Quality
- Superior Flatness and Straightness
APPLICATIONS:
- Magazine Locks
- Trigger Mechanisms
- Receivers
- Barrels
- Bolt Actions
- Magazine Tubes
- Tripods
- Slides
- Gas Block/Tubes
- Other Mechanisms
Benefit from the PLYMOUTH ADVANTAGE® by specifying Plymouth for your Firearms raw material needs:
|
PRODUCT |
MANUFACTURED AT |
|
Steel Tubing, Round & Shaped Carbon & Alloy Steel Tubing – Seamless, up to 5.50” OD – Welded, up to 1.75” OD Stainless Steel & Nickel Alloy Tubing – Seamless, up to 2.00” OD – Welded, up to 4.00” OD |
Streator, IL* & Winamac, IN* Eupora, MS* Salisbury, MD East Troy. WI |
|
Near-Net Extrusions Titanium – Fits within a 7.75” circle size Carbon & Alloy Steel – Fits within a 6.00” circle size Stainless Nickel Alloy – Fits within a 5.50” circle size |
Hopkinsville, KY* |
|
Net-Shaped Cold Drawn Profiles Carbon & Alloy Steel, Stainless Steel & Nickel Alloys, Titanium, Exotics Solids & Rounds – 0.250” – 3.750” OD Hexagons & Octagons (across flats) – 0.3125” – 3.625” Rectangles & Squares – 0.625” per side min; 5.00” max Unique Shapes – 0.625”; profile must fit within a 6.50” circle |
Hopkinsville, KY* |
|
End Finishing & Machining |
Eupora, MS* |
|
Heat Treat |
Winamac, IN* |
